The Protec 6000PLUS Discrete Sounder with optional Visual Alarm Device (VAD) is Loop Powered and utilises the 6000PLUS sensor range common mounting base.
The design is based on LED technology for long life, reliability and low power consumption. Compliant with DDA legislation, this high intensity led VAD warns those with hearing impairments or in noisy environments.
Sounder – The device is equipped with an integrated loop powered electronic sounder with three programmable sounder tone options, constant, pulse or warble, selectable by the control panel along with adjustable volume control. A loop short circuit isolator is also incorporated. The sounder tones are compatible with the full range of Protec 6000 Electronic Sounders.
Discrete VAD – The device is designed for installation at a height of up to 3m and adjustable from 3m to 7.5m room coverage to suit all applications.
For smaller areas, the device can be switched down from 7.5m to 3m thus reducing power consumption and maximising the number of devices on the loop.
The product has a unique lens that distributes the light in a cylindrical shape to achieve the required illumination of 0.4lux/m² over the entire room area in accordance with EN54 Part 23.
The design is based on LED technology for long life, reliability and low power consumption. Compliant with DDA legislation, this high in
Tone Options
Warble Tone: 990Hz(250ms), 730Hz(250ms)
Continuous Tone: 990Hz
Pulse Tone: 990Hz(500ms), Silence(500ms)
Tone Volume Options
The tone and volume are selectable at the control panel (measured at one metre):
High: 85dB(A), Mid: 75dB(A), Low: 65dB(A)
BASE Options
6000PLUS/BASE
– Low profile common mounting base
6000PLUS/FFBASE
– Fast fixing semi recessed base
Note – base options above are included in the product approval.
15LHK0958-01
Environment | -10°C to +50°C (95% R.H. non condensing or icing) |
Ingress Protection | IP33C |
Weight (excluding base) | 98g |
Loop Powered | Yes |
Loop Standby Load | 6000P/S – 0.4mA 6000P/SVAD – 0.55mA |
Loop Peak Alarm Load | 6000P/S – 5mA 6000P/SVAD – 24mA |
Loop Voltage | 18 – 28V |
Mounting Height (x) | 3 metres |
Coverage(y) | 7.5m configurable to 3m |
Coverage Volume Code | C-3-7.5 |
Flash Rate | 0.5Hz white flash |
Isolator | Yes |
Dimensions (mm) | 95ø x 54.5H |
Device Protocol | Algo-Tec™ 6000PLUS |
Product Approval | CoCP No: 0359-CPR-0407 DoP No: PFD-CPR-0122 (6000P/S) DoP No: PFD-CPR-0123 (6000P/SVAD) Relevant Standard: EN54 Part 3, 17 & 23 CE Marked |
Datasheet Clique Aqui